Home  |  Site Map  |  A-Z Index  |  Contact
Finning Worldwide Locations

Power

STPC-HV4, 6, 8 FREE STANDING HIGH VOLTAGE PANEL
The Free Standing High Voltage Panel is used in cases where 600 or 480 Volt distribution is required.
  • Steel Construction Frame and Back-Plate.
  • Square D Visible Blade Disconnects for safety and reliability.
  • 200 Amp Main Disconnect.
  • Secondary (60 Amp) Disconnects c/w AR648 Receptacles.
  • Available with four, six and eight outlets.
  • Weatherproof construction.
  • CSA Approved.
  • Special configurations are available upon request. Consult our office for pricing.
  • CABLE EXTRA
STPC-LV1 FREE STANDING LOW VOLTAGE PANEL - 1 PHASE
The Free Standing Low Voltage Panel is designed to provide power for lighting and power tool use.
  • Frame and Back-Plate are of steel construction.
  • Weatherproof construction.
  • One 15 KVA (600 or 480 Volt Primary) Single Transformer.
  • One 60 Amp Visible Blade Disconnect complete with AR648 Receptacle.
  • One 100 Amp Distribution Panel.
  • Ten 15 Amp GFI Duplex Receptacles.
  • Two 20 Amp 125/250-Volt Twist Lock Receptacles.
  • CSA Approved.
  • Special configurations are available upon request. Consult our office for pricing.
  • CABLE EXTRA
STPC-LV3 FREE STANDING LOW VOLTAGE PANEL-S - 3 PHASE
The Free Standing Low Voltage Panel is designed to provide power for lighting and power tool use, and provide 600 or 480-Volt distribution.
  • Frame and Back-Plate are of steel construction.
  • 45 KVA 600-120/208V Transformer or 45 KVA 480.
  • 225 Amp/4W Splitter.
  • Three 60 Amp Visible Blade Disconnects.
  • 60 Amp Transformer Disconnect.
  • 225 Amp Ciruit Breaker Load Center.
  • Twenty 15 Amp GFI Duplex Receptacles.
  • CSA Approved.
  • Special configurations are available upon request. Consult our office for pricing.
  • CABLE EXTRA
*NEW - Now Available Stackable configuration STPC-LV3-S.
STPC-HCI I-LINE POWER DISTRIBUTION PANEL
I-Line Power Distribution Panel are designed to feed lighting and appliance panel boards or large motors.
  • 225 - 1,200 Amp 600 Volt.
  • Mounted in a freestand weatherproof enclosure.
  • CSA Approved.
  • Consult our office for breakers and pricing.
  • CABLE EXTRA
STPC-LPHV 4,8 LOW PROFILE HIGH VOLTAGE PANEL, 225 AMP
Low Profile High Voltage Panel is used in cases where 600 or 480 Volt distribution is required.
  • Enclosure is of 16 gauge steel and welded construction.
  • 45" Width x 34" Height x 30" Diameter, approximate weight is 200 lbs.
  • 225 Amp Main Square D Breaker feeding 225 Amp Load Center.
  • c/w 60 Amp Breakers feeding 60 Amp AR 648 Receptacles.
  • Panels are available with either 4 or 8 receptacles.
  • CSA Approved.
  • CABLE EXTRA
 
STPC-LPHV 4-400AMP LOW PROFILE HIGH VOLTAGE PANEL, 400 AMP
Low Profile High Voltage Panel is used in cases where 600 or 480 Volt distribution is required.
  • 400 Amp Main Lugs complete with 4 x 100A/4W4P or 3W4P Receptacles.
  • CSA Approved.
  • CABLE EXTRA
STPC-MP MINI-POWER CENTER
In areas where size is a consideration or limited number of receptacles are required, the Mini-Power Center can be used.
  • Steel-Framed wheeled cart.
  • 10 KVA (600 or 480 Volt primary) Single-Phase Transformer.
  • Square D Visible Blade Disconnect.
  • Eight (8) GFI duplex receptacles
  • Weatherproof construction
  • Special Configurations are available upon request. Consult our office for pricing.
  • CSA Approved.
  • CABLE EXTRA
STPC-CT 1 TABLE STYLE C PANELS
Table Style C Panels are designed for use where voltage reduction is not required.
  • Using 120/208 Volt 3-Phase or 120/240 Volt Single-Phase Supplies Voltage.
  • 10 Duplex GFI Receptacles for 120 Volt Distribution.
  • 100 Amp Main Breaker.
  • Steel construction and suitable for outdoor use.
  • CSA Approved.
  • AR'S AND CABLE EXTRA
STPC-WS WELDER SPLITTER STATION
Weatherproof 100 Amp Welder Splitter Station mounted on a freestanding frame for welding distribution. When connected to a 600 or 480 Volt source, this panel provides power to two welder units. The transformer/load centre component has 4 GFI protected receptacles that can be used to provide power for lights and tools.
  • Weatherproof construction.
  • Square D Heavy Duty Safety Switch 30A 600 V AC
  • 4 Duplex Receptacles.
  • 4 GFI Breakers.
  • Transformer: 5 kVA Single Phase, Primary 480-600V, Secondary 120/240V, 60 Hz
  • CSA Approved.
  • CABLE EXTRA